How To File Chainsaw Chain [Ultimate Guide 2022]

To maintain a chainsaw, it is important to keep the chain lubricated and properly filed. Filing the chain periodically helps remove any burrs or obstructions that may have built up on the chain.

This guide will show you how to file a chainsaw chain correctly. Chainsaws are dangerous tools, so please be careful when working with them. Always read the manufacturer’s instructions before using a chainsaw.​

>>>> Best Miter Saw for Finish Carpentry

How To File Chainsaw Chain

If you use a chainsaw regularly, it’s important to keep the chain well-maintained. Filing the chain periodically helps to remove any burrs or obstructions that may have built up.

Here’s a quick guide on how to file a chainsaw chain correctly:

First, make sure the chainsaw is turned off and the chain is not moving. Next, use a chainsaw file to dress (or sharpen) each cutter on the chain. It’s important to maintain the same filing angle on each cutter.

Use a depth gauge tool to check the depth gauges after you’ve filed the cutters. The depth gauges should be flush with the cutters. If they’re not, use a chainsaw file to file them down.

Finally, use a chainsaw file to sharpen the rakers. The rakers are the teeth that control the depth of the cut.

>>>> Chainsaw Dies when I Give it Gas

If you take care of your chainsaw and file the chain regularly, it will last longer and perform better.

Tools Required

-Chainsaw

-Chainsaw file

-Depth gauge tool

-Raker tool (optional)

Step-by-step guide

If the chain on your chainsaw is dull, it can make cutting through wood difficult and time-consuming. A properly filed and sharpened chainsaw chain will make your chainsaw work more efficiently.

When filing a chainsaw chain, you will need a few supplies.

First, you will need a chainsaw file.

Second, you will need a chainsaw file guide.

Third, you will need a file handle.

Fourth, you will need a chainsaw bar oil.

Fifth, you will need a clean rag.

Once you have gathered all of your supplies, you are ready to begin filing your chainsaw chain.

The most important thing is to know the chain saw file size that is recommended for your chainsaw chain.

If you are not sure, it is always best to err on the side of a larger file.

You do not want to use a file that is too small, as this can damage your chain.

Now that you know the right file size, you can begin.

Begin by putting on safety goggles and gloves. Next, locate the chainsaw’s guide bar. The guide bar is the long, metal bar that the chain runs around.

  1. Locate the two holes on either end of the guide bar. These are the oiling holes.
  2. Apply a few drops of chainsaw bar oil into each of the oiling holes.
  3. Next, take your chainsaw file and insert it into the file handle.
  4. Now, attach the file handle to the file guide.
  5. Position the file guide so that the file is touching the chain.
  6. Begin filling the chain by moving the file back and forth across each link of the chain.
  7. Be sure to apply even pressure as you file.
  8. After you have finished filing the chain, remove the file handle and file guide.
  9. Wipe off any excess oil from the guide bar with a clean rag.

Your chainsaw chain is now sharpened and ready to use. Remember to always use caution when operating a chainsaw.​

FAQs

How tight should a chainsaw chain be?

The chainsaw chain should be tight enough so that there is no slack, but not so tight that it binds. To test the tension, you should be able to push the chain forward and backward with your fingers.

If the chain is too loose, it can come off the saw while you’re using it. If the chain is too tight, it can bind and cause the saw to stop working.​

When do you know it’s time to replace a chainsaw chain?

If the chainsaw chain is excessively worn or damaged, it will need to be replaced. You should also replace the chain if it becomes too loose.

A chainsaw chain that is too loose can come off the saw while you’re using it, which can be very dangerous.​

How long should a chainsaw blade stay sharp?

The length of time a chainsaw blade will stay sharp depends on how often you use the saw and what you’re using it to cut.

If you’re cutting softwoods, the blade will stay sharp longer than if you’re cutting hardwoods. A general rule of thumb is that you should sharpen the blade after every 10 hours of use.

Of course, this will vary depending on the type of wood you’re cutting and how hard it is. If you’re not sure, it’s always best to err on the side of sharpening the blade more often rather than less.​

In what direction do you file a chainsaw chain?

When filing a chainsaw chain, you will need to move the file back and forth across each link of the chain. Apply even pressure as you file.

How often should you file a chainsaw chain?

It is generally recommended that you file your chainsaw chain after every 5-10 hours of use.

How do you know if a chainsaw chain is dull?

If the chain on your chainsaw is dull, it can make cutting through wood difficult and time-consuming. A properly filed and sharpened chainsaw chain will make your chainsaw work more efficiently.

Conclusion

Chainsaw chains need to be filed to keep them sharp and performing at their best. Filing the chain is a task that can be done by anyone with the proper instructions, and it’s important to do it regularly for optimal performance.

In this post, we have given you all of the information you need to file your chainsaw chain like a pro. We hope you are satisfied with the guide on how to file a chainsaw chain. Thanks for reading!

>>>> How to Use Chainsaw Rust?

Leave a Comment