There’s nothing more frustrating than trying to untangle a chainsaw chain. It seems like every time you try to fix it, the chain just gets worse and worse. In this blog post, we’ll show you how to untangle a chainsaw chain with some easy steps.
We’ll also give you some tips on how to avoid getting your chainsaw chain tangled in the first place. Stay safe and stay productive with this guide!
>>> How To Sharpen Chainsaw With Dremel
Let’s get started!
How To Untangle A Chainsaw Chain?
If you’re like most people, the first thing you’ll do when you see a tangled chainsaw chain is trying to fix it with your bare hands. This is a mistake. The best way to untangle a chainsaw chain is with a pair of pliers.
Start by finding the two ends of the chain. If you can’t see them, gently pull on the chain until you find them. Once you’ve found the ends, use your pliers to straighten out the links.
Next, you’ll want to find the middle of the chain. The easiest way to do this is to find the link that’s attached to the bar. Once you’ve found the middle, gently pull on both ends of the chain until the middle link comes free.
Finally, use your pliers to straighten out the remaining links. Once you’ve done this, your chainsaw chain should be good as new!
Step-by-step guide
Remove the chain from your chainsaw
The first step to untangling your chainsaw chain is to remove it from the saw. This will make it much easier to work with and will prevent you from accidentally cutting yourself.
To remove the chain, simply loosen the bar clamp and slide the bar off of the saw. The chain will come with it.
Once the chain is off, find a flat surface to work on. A table or countertop will work perfectly.
>>> How to Put the Chainsaw Chain back on?
Identify Two Opposing Loops
The next step is to find the two loops that are tangled together. These loops will be facing in opposite directions.
If you can’t see the loops, gently pull on the chain until they become visible.
Once you’ve found the loops, use your fingers to separate them. You may need to use a little force, but be careful not to pull too hard.
Expanding the Loops
Now that you’ve found the loops, it’s time to expand them. This will give you enough room to work with the chain and untangle it.
To expand the loops, simply hold onto one end of the chain and pull. The loop should begin to expand.
Untangle the Chain Links
Now that the loops are expanded, you can begin to untangle the chain links. Start by taking one link from each loop and connecting them.
Once the links are connected, gently pull on the chain until the next link comes free. Repeat this process until all of the links are connected.
Reassembling Chain on Bar
Once the chain is untangled, it’s time to reassemble it on the bar. Start by threading one end of the chain through the bar.
Next, take the other end of the chain and thread it through the first link. Make sure that the links are facing the correct direction.
Finally, pull the chain tight and secure it with the bar clamp. Your chainsaw is now ready to use!
Avoiding Tangled Chains
The best way to avoid a tangled chainsaw chain is to keep it clean and lubricated. A clean chain will run smoother and is less likely to get tangled.
Lubricating your chain will also help to keep it running smoothly. Be sure to use a quality chain oil and apply it regularly.
Another way to avoid tangles is to use a chainsaw file. This will help to keep the links in good condition and prevent them from getting tangled.
Precautions
Before you begin, it’s important to take some safety precautions. First, make sure that your chainsaw is turned off and the chain is not moving.
Next, always wear gloves when working with a chainsaw chain. This will protect your hands from the sharp edges of the links.
Finally, be sure to work in a well-ventilated area. This will help to prevent inhaling sawdust and other harmful particles.
FAQs
Q: How often should I clean my chainsaw chain?
A: It’s a good idea to clean your chainsaw chain after every use. This will help to keep it running smoothly and prevent it from getting tangled.
Q: What is the best way to lubricate my chainsaw chain?
A: The best way to lubricate your chainsaw chain is to use a quality chain oil. Apply the oil regularly to keep the chain running smoothly.
Q: What should I do if my chainsaw chain gets tangled?
A: If your chainsaw chain gets tangled, follow the steps in this article to untangle it. We have covered how to find the loops, expand the loops, and untangle the chain links.
Q: How often should I untangle a chainsaw chain?
A: It’s a good idea to untangle your chainsaw chain every few weeks. This will help to keep it in good condition and prevent it from getting tangled.
Q: How can I prevent my chainsaw chain from getting tangled?
A: The best way to prevent your chainsaw chain from getting tangled is to keep it clean and lubricated. A clean chain will run smoother and is less likely to get tangled. Lubricating your chain will also help to keep it running smoothly. Be sure to use a quality chain oil and apply it regularly.
Another way to avoid tangles is to use a chainsaw file. This will help to keep the links in good condition and prevent them from getting tangled.
Conclusion
Chainsaw chains can be a little confusing to untangle, but with a step-by-step guide and some helpful tips, you’ll have it done in no time. We hope this article was helpful and that you feel confident to tackle this project on your own next time. If not, don’t hesitate to reach out for help – we’re always here to lend a hand!