When you’re sawing through a tree, your chainsaw must be cut cleanly and evenly. If it doesn’t, the job will be harder than it needs to be, and the finished product may be crooked or uneven.
In this blog post, we’ll explore some of the reasons why my Chainsaw Cut is Crooked and what you can do to fix it. Stay safe out there!
>>> How to Cut a Tree on the Ground with a Chainsaw?
Let’s get started!
Why Does My Chainsaw Cut Crooked
Your chainsaw is one of the most important tools in your shed – it’s what you rely on to get the job done, whether you’re cutting firewood or clearing fallen branches. So when your chainsaw starts cutting crooked, it can be frustrating and even dangerous.
There are a few different reasons why your chainsaw might be cutting crooked. Here are some of the reasons.
Reasons my chainsaw is cutting crooked
Chain
The chain is the part of the saw that does the actual cutting, so it must be sharp and in good condition. If the chain is dull, it will cause the saw to bind and cut crooked.
To check if your chain is dull, look at the cutting teeth. If they’re dull, you’ll see flat spots or chips in the metal. If the chain is dull, the teeth will be almost completely worn down.
If your chain is dull, you’ll need to replace it with a new one. You can take it to a certified chainsaw technician or dealer to have it replaced, or you can do it yourself if you’re comfortable with doing so.
Guide bar
The guide bar is the metal bar that the chain runs around. The guide bar must be in good condition because if it’s damaged or bent, it can cause the saw to cut crooked.
To check if your guide bar is damaged or bent, look at it carefully. If you see any cracks, dents, or bends, it’s time to replace it. You can take it to a certified chainsaw technician or dealer to have it replaced, or you can do it yourself if you’re comfortable with doing so.
Engine
The engine is what powers the saw, and if it’s not tuned properly, it can cause the chain to bind and cut crooked.
To tune the engine, you’ll need to adjust the carburetor. This is a delicate process, so it’s best to take the saw to a certified chainsaw technician or dealer to have it done.
If you’re not sure why your chainsaw is cutting crooked, the best thing to do is take it to a certified chainsaw technician or dealer for diagnosis and repair. In the meantime, here are a few tips to help you get the best possible cut from your chainsaw. Otherwise, follow these steps.
Keep the chain sharp
One of the most common reasons for a chainsaw to cut crooked is because the chain is dull. When the chain is dull, it doesn’t cut through the wood as cleanly or smoothly, which can cause the saw to bind and kick back.
To keep your chain sharp, you’ll need to use a file or grinder to sharpen the teeth. You should also check the depth gauges to make sure they’re set correctly – if they’re too high, the chain will cut too deeply into the wood and bind; if they’re too low, the chain won’t cut as deeply, and will just bounce off the wood.
Check the guide bar
Another common reason for a chainsaw to cut crooked is because the guide bar is damaged or bent. The guide bar is what the chain runs along, and if it’s damaged, the chain can start to cut crooked.
>>>> What Size Chainsaw Do I Need?
To check the guide bar, remove it from the saw and inspect it for damage. If you see any cracks, dents, or other damage, it’s best to replace the guide bar.
Tune the engine
If the engine on your chainsaw isn’t tuned properly, it can cause the chain to bind and cut crooked. To tune the engine, you’ll need to adjust the carburetor. This is a task best left to a certified chainsaw technician or dealer.
Use a chainsaw Sharpener
If your chainsaw is cutting crooked and you’re not sure why it’s a good idea to use a chainsaw sharpener. A chainsaw sharpener is a tool that helps keep your chain sharp and prevents it from getting dull too quickly.
When using a chainsaw sharpener, you’ll need to follow the manufacturer’s instructions carefully. If you’re not sure how to use the tool, it’s best to take your chainsaw to a certified technician or dealer for sharpening.
With these tips, you can help keep your chainsaw cutting straight and prevent it from cutting crooked.
Precautions
If your chainsaw is cutting crooked, it’s important to take precautions to prevent injury. Always wear gloves, eye protection, and ear protection when using a chainsaw.
If the chain binds or kicks back, release the trigger and allow the saw to come to a complete stop before you try to remove it from the wood.
If you’re not sure what’s causing your chainsaw to cut crooked, or how to fix it, take it to a certified technician or dealer for diagnosis and repair.
The Chainsaw Will Cut Straight if the Blade is Parallel to the Ground: This means that when you are cutting a tree, the chainsaw blade should be parallel to the ground. If it is not, then your chainsaw will cut crooked.
When you are sawing a piece of wood, make sure the log is flat on the ground and don’t try to cut at an angle. Sawing at an angle increases the chances that your chainsaw will cut crooked because it is no longer parallel to the ground.
Conclusion
Several factors can cause your chainsaw to cut crooked. By understanding these factors and taking the necessary precautions, you can minimize the chances of your chainsaw cutting crooked.
We hope this post helped understand some of the reasons why a chainsaw might cut crooked. Always use caution when operating a chainsaw, Thanks for reading! We hope you enjoyed reading the post