How to Cut a Tree on the Ground with a Chainsaw?

When most people think of using a chainsaw, they think of cutting down trees. But did you know that you can also use a chainsaw to cut down a tree on the ground? This blog post will show you how to do just that. 

We will also discuss some of the pros and cons of using a chainsaw to cut down trees on the ground. So, if you are thinking about cutting down a tree on the ground, keep reading!

>>> What Size Chainsaw Do I Need?

How to Cut a Tree on the Ground with a Chainsaw?

Using a chainsaw to cut down a tree on the ground is not as difficult as it may seem. However, there are a few things you need to keep in mind before you start. 

First, make sure that the area around the tree is clear of any obstacles. This will help you avoid damaging anything while you are cutting. 

Second, always wear protective gear, including gloves, goggles, and a face mask. This will help to protect you from flying debris.

Finally, be sure to have a helper on hand to steady the tree while cutting it down.

The first step in cutting down a tree on the ground is to create a cutline. This is a line that you will use to guide your cutting. Use a chalk line or a string line to mark a straight line around the tree trunk to create a cutline. The cutline should be about 6 inches from the trunk of the tree.

Next, you will need to make cuts along the cutline. You will need to make a horizontal cut first and then a vertical cut for each cut. The horizontal cuts should be about 1/3 of the way through the tree trunk. 

Be sure to angle the horizontal cuts slightly to meet in the middle. After making the horizontal cuts, you can then make the vertical cuts. These cuts should be straight up and down and about 1/3 of the way through the tree trunk.

Once you have made all of the cuts, you can then begin to saw through the tree trunk. Be sure to see slowly and evenly so that you do not damage the chainsaw. 

>>>> How to Sharpen a Chainsaw?

When you are about halfway through the tree trunk, you can stop and have your helper begin to push the tree over. Once the tree is lying on the ground, finish sawing through the trunk.

Now that you know how to cut a tree on the ground with a chainsaw, you may be wondering if this is the best option for you. There are some pros and cons to consider before making your decision.


One of the benefits of using a chainsaw to cut down a tree on the ground is that it is relatively quick and easy. You can usually have the tree down in just a few minutes. Additionally, chainsaws are very versatile tools and can be used for many different tasks.

Things You Need to Pay Attention to:

However, there are some drawbacks to using a chainsaw to cut down a tree on the ground. One of the biggest concerns is safety. If you are not careful, you could easily injure yourself or damage property. Additionally, chainsaws can be pretty loud, so you need not disturb your neighbors.

Other Options:

If you are still undecided, there are a few other options. You could hire a tree removal service to do the job for you. Or, you could try using a log splitter to split the tree trunk into smaller pieces.

No matter what option you choose, follow all safety precautions. Cutting down a tree can be dangerous, so it is important to take all necessary precautions.

>>>  How are Chainsaw Bars Measured?

Leave a Comment