How to Change Blade on Ryobi Miter Saw (Step-by-Step Guide)

Ryobi is a brand of power tools and equipment, including saws. Miter saws are cutting machines that can make crosscuts, bevel cuts, miter cuts, and compound bevel cuts.

More so, the blades on these tools need to be changed periodically for maximum performance and safety. Read on to learnĀ how to change blade on Ryobi miter saw.

>>>> Can You Cut PVC with a Miter Saw?

How to Change Blade on Ryobi Miter Saw – Step-wise Guide

Step 1: Turn Off Power

The first step is always to make sure that the power is off. You don’t want to be changing the blade on your Ryobi miter saw while it’s still turned on. So, find the switch and turn it to the “off” position.

Step 2: Blade Guard

The next step is to open the blade guard. For this, you need to find the knob or lever used to open the blade guard. It is usually located on the left side of the handle. Just rotate it in the counterclockwise direction to open the blade cover.

Step 3: Blade Nut

Now you need to loosen the blade nut holding the current blade in place. The location of the blade will be different for different models. But, in most Ryobi miter saws, the blade is located on the right side of the handle. Just look for it, and you will find it.

>>>> How to Change Blade on Dewalt Miter Saw

To loosen the blade nut, you need to use an open-end wrench or a socket wrench. The size of the wrench will also be different for different models. So, check your user manual to find out the right size.

Once you have found the right size, place the wrench on the blade nut and rotate it counterclockwise.

Step 4: Remove The Blade

Now that the blade nut is loose, you can remove the blade from its position. Just pull it out and keep it aside. Take a look at the teeth of the blade to check if it needs to be replaced. If it does, then go ahead and get a new one.

Step 5: Install The New Blade

To install the new blade:

  1. Please place it in the position where the old one was.
  2. Make sure that the teeth are facing the correct direction.
  3. Once the blade is in place, take the blade nut and rotate it clockwise to tighten it.

Step 6: Close The Blade Guard

Now that the new blade is installed, you can close the blade guard. Just rotate the knob or lever in the clockwise direction to do so.

Step 7: Turn On Power

The last step is to turn on the power and test the new blade. Just flip the switch to the “on” position and start using your Ryobi miter saw.

That’s it! You have successfully changed the blade on your Ryobi miter saw.

What Are the Necessary Tools for the Job?

You will need a few tools to change the blade on your Ryobi miter saw. First, you will need a wrench to loosen and tighten the blade bolt. Second, you will need a new blade. Be sure to select a blade compatible with your model of saw.

Tips for Completing the Task Safely and Effectively

  • Always unplug the saw from the power source before changing the blade.
  • Be careful when handling the old blade, as it will be sharp.
  • Ensure that the new blade is installed with the teeth facing in the proper direction.
  • Lower the blade and test the saw to ensure it is working properly before using it.


Changing the blade on your Ryobi miter saw is a simple task that you can complete in a few minutes. Be sure to follow the steps outlined in this article and consult your owner’s manual for specific instructions on your saw model. With the proper tools and a little bit of care, you will be back to cutting.

>>> How to Unlock Dewalt Miter Saw

Leave a Comment